Commit Graph

603 Commits

Author SHA1 Message Date
Matthias Schiffer
81b2142e65 Merge branch 'patch-1' of https://github.com/ohrensessel/gluon 2015-11-22 23:28:39 +01:00
Matthias Schiffer
e528977100 gluon-site: set PKG_FILE_DEPENDS to site.conf and i18n/ only
PKG_FILE_DEPENDS caused the whole site repo to be hashed to determine if
gluon-site needed rebuilding. While this is normally no problem,
alternative build setups sometimes put the Gluon repo inside the site repo,
causing long build times and parallel build failures.
2015-11-18 02:39:05 +01:00
Leo Krueger
bc15b6c810 gluon-ebtables-filter-multicast: drop icmpv6 type 128 & 139, drop icmp
in a layer 2 mesh network, multicast pings cause a lot of traffic in the
network, significantly increasing the 'backgroudn noise' (= Grundrauschen)
and stressing nodes in the network.

this commit blacklists all icmpv4 multicast traffic as well as multicast
icmpv6 echo-requests and node iformation queries. as no application
depending on these types of multicast traffic is known, blacklisting is safe.
2015-11-12 21:16:37 +01:00
Matthias Schiffer
412e1ef147 gluon-core: fix removal of "OpenWrt" default WLAN interface
Fixes #534
2015-10-28 17:06:29 +01:00
Matthias Schiffer
3ddcf50b80 Drop htmode field from config, always use HT20
Fixes #487
2015-10-27 01:57:10 +01:00
Matthias Schiffer
3647cf1d18 Remove leftover file from gluon-radio-config 2015-10-27 01:57:10 +01:00
Matthias Schiffer
9b46a05de7 Merge pull request #450 from freifunk-gluon/status-page
gluon-status-page: new status page
2015-10-26 22:55:00 +01:00
Matthias Schiffer
557a073dc7 gluon-mesh-batman-adv-core/gluon-luci-portconfig: fix configuration of br-client ifname with multiple interfaces in lan_ifname
There are a few devices on which lan_ifname contains multiple interface
names separated by spaces.
2015-10-26 22:29:44 +01:00
Nils Schneider
84b6374970 gluon-client-bridge: basic br-client config and wireless AP
This package provides br-client and sets up a wireless AP interface for
clients.
2015-10-26 21:14:32 +01:00
Matthias Schiffer
22130e84e8 Merge gluon-radio-config into gluon-core
gluon-radio-config contained only a single file. The code has been adjusted
to allow creating a Gluon configuration without WLAN support by removing
the wifi24 and wifi5 sections from site.conf.
2015-10-26 20:59:56 +01:00
Matthias Schiffer
53211b5b46 Replace gluon-cron by micrond 2015-10-15 23:52:30 +02:00
Matthias Schiffer
d0a78ea8ba Merge branch 'opkg' 2015-10-15 22:28:41 +02:00
Matthias Schiffer
45d1d04ae3 Merge branch 'simple-tc' 2015-10-15 22:28:32 +02:00
Matthias Schiffer
2fefdeee63 gluon-mesh-batman-adv-core: neighbours.d/wifi: output empty object instead of empty list when there are no neighbours on an interface 2015-10-15 02:42:28 +02:00
Matthias Schiffer
26682b24b3 Replace gluon-simple-tc by non-Gluon-specific simple-tc
The Gluon-specific functions of the gluon-simple-tc package are moved to
gluon-mesh-vpn-fastd.
2015-10-15 02:38:47 +02:00
Jan-Philipp Litza
daa15290ab gluon-announce: Remove now unused collect.lua
The file promotes the probably unnecessary re-execution of the announce
scripts. Instead, gluon-announced should be queried using

    gluon-neighbour-info -d ::1 -p 1001 -t0 -r nodeinfo

if both gluon-announced and gluon-neighbour-info are present. But to not
depend on any of those, no script for this one-liner is provided.
2015-10-15 01:49:20 +02:00
Jan-Philipp Litza
bae6519279 gluon-alfred/gluon-status-page: Query gluon-announced
By not executing all scripts from gluon.announce themselves, both should
be considerably faster and lighter on RAM usage.
2015-10-15 01:49:20 +02:00
Jan-Philipp Litza
d2ff7d5c22 gluon-neighbour-info: Add -l and -c parameter, make event type for -s configurable 2015-10-15 01:49:20 +02:00
Matthias Schiffer
3725f7bca3 Merge remote-tracking branch 'origin/announce.d' 2015-10-15 01:31:05 +02:00
Matthias Schiffer
d5c334af6d gluon-core: replace opkg site configuration to make it more flexible
The new options allow specifying custom repositories and are evaluated
in an upgrade script, not during build.
2015-10-14 02:57:29 +02:00
Matthias Schiffer
b46d4fd537 gluon-mesh-batman-adv-core: make gateway selection class configurable
Fixes #401
2015-10-12 21:49:02 +02:00
Nils Schneider
9dffb1284f gluon-announce(d): preload functions, collectgarbage
By calling collectgarbage() at various places I was able to reduce heap
usage by ~270kb.
2015-10-12 20:54:03 +02:00
Nils Schneider
435ded0c60 gluon-announce: build a tree of functions first
collect_dir() will now pre-load all files and return a function that will
collect all information.
2015-10-12 20:54:03 +02:00
Matthias Schiffer
a22c808634 Merge pull request #466 from kb-light/11s-mesh-dev
gluon-mesh-batman-adv-core: prepare for 802.11s mesh
2015-10-11 23:01:08 +02:00
Matthias Schiffer
12f9df7e86 gluon-config-mode-core: don't throw error when no config mode modules are installed
The expert mode can still be useful without any cohfig mode modules.
2015-10-11 21:19:28 +02:00
Matthias Schiffer
05f146f817 Validate section names from site.conf in various packages 2015-10-11 19:34:14 +02:00
Ruben Barkow
06a2b2b1d1 gluon-luci-private-wifi: typo seperaten 2015-10-09 11:59:12 +02:00
Matthias Schiffer
98542b015d i18n: s/noeud/nœud/ 2015-10-08 22:16:25 +02:00
kb-light
955dc886a8 gluon-mesh-batman-adv-core: prepare for 802.11s mesh
keep macfilter and maclist config after fw-update
2015-09-22 10:48:09 +02:00
srauscher
16888d214d Add french translation 2015-09-17 07:28:09 +02:00
Alex
b465504ae8 add: info for 802.11s interface
additional information for commit 2a93c58042
2015-09-13 14:32:53 +02:00
Nils Schneider
014f5751c8 gluon-status-page-api: increase uhttp.max_requests to 32
Now that the status page api has been rewritten in C CPU load and memory
usage is much lower. Also, nodes with both ibss and 11s mesh and dual
band wifi may require up to 9 connections for a single client, thus the
previous limit of 12 seemed a little low.
2015-09-05 12:11:35 +02:00
Nils Schneider
8be372a590 gluon-status-page-api: rewrite stations in C 2015-09-05 12:11:33 +02:00
Nils Schneider
4b8f6c9835 gluon-status-page-api: rewrite neighbours-batadv in C 2015-09-05 11:47:44 +02:00
Nils Schneider
431ac81407 gluon-status-page-api: split API from gluon-status-page
This will make it easier to replace the API with C programs.
2015-09-05 11:47:44 +02:00
Nils Schneider
5e5dc5ab18 gluon-status-page: new status page 2015-09-04 20:50:18 +02:00
Nils Schneider
34752c7e0b br-client: convert option ifname to list ifname
Convert option ifname in br-client to use a list instead. This
simplifies adding and remove interfaces:

uci:add_to_set("network", "client", "ifname", "eth0")
uci:remove_from_set("network", "client", "ifname", "eth0")

An option ifname will be automatically converted to a list when
performing an upgrade.

Packages affected: gluon-mesh-batman-adv-core, gluon-luci-portconfig
2015-09-04 20:31:53 +02:00
Matthias Schiffer
faba9efb88 Merge branch 'jsonc-sink' of https://github.com/FreifunkBremen/gluon 2015-09-04 17:15:58 +02:00
Jan-Philipp Litza
961e6cc1c0 Add sink support to luci-lib-jsonc and use it where needed 2015-09-04 12:27:45 +02:00
Nils Schneider
96033758ab Merge pull request #473 from FreifunkBremen/batctl-if-lua
Don't fork batctl from announce scripts
2015-09-04 11:40:00 +02:00
Jan-Philipp Litza
bccf4f7b21 gluon-mesh-batman-adv-core: Add lua code for iface listing, don't fork 2015-09-03 16:33:13 +02:00
Matthias Schiffer
3599d8912b Merge branch 'slim-down-lua-scripts' of https://github.com/FreifunkBremen/gluon 2015-09-03 15:29:27 +02:00
Nils Schneider
21935ffc81 gluon-status-page: set html encoding to utf-8 2015-09-02 21:19:41 +02:00
Jan-Philipp Litza
339a6c9959 Remove dependencies on luci.util (and partly nixio.fs) from announce scripts 2015-09-02 13:17:59 +02:00
Matthias Schiffer
a25d00ddce Merge branch 'feature-optional-thekey' of https://github.com/FreifunkBremen/gluon 2015-08-31 00:42:54 +02:00
Matthias Schiffer
d97586dd89 Merge branch 'announce-separate-frequencies' of https://github.com/FreifunkBremen/gluon 2015-08-30 23:53:36 +02:00
Jan-Philipp Litza
89a9d8138c gluon-mesh-batman-adv-core: Announce client count by frequency 2015-08-30 23:39:45 +02:00
Jan-Philipp Litza
eb590bdc12 gluon-config-mode-mesh-vpn: Move display of key to translations
When rebooting the node in config mode, currently the fastd key is
forcefully displayed in a fixed format. This is confusing in communities
where fastd accepts all keys and no key submission is needed.
Furthermore, some communities might want to personalize the display of
the key (see #387).

This patch moves the displaying <div> from the package's lua file to the
translation files of the sample site configuration and mentiones the
change in the release notes.
2015-08-30 21:55:29 +02:00
Jan-Philipp Litza
15a80aaffd Switch from luci-lib-json to luci-lib-jsonc
Apart from replacing a patch for the former by two patches for latter,
this involved minimal adaptations of the lua scripts in the following
packages:

* gluon-announce
* gluon-announced
* gluon-mesh-batman-adv-core
* gluon-status-page
2015-08-30 21:05:13 +02:00
Matthias Schiffer
4405f39869 Merge remote-tracking branch 'origin/radio-config' 2015-08-29 02:36:38 +02:00