Commit Graph

3143 Commits

Author SHA1 Message Date
David Bauer
ac971f88e8 mvebu-cortexa9: rename Linksys WRT1200AC 2019-10-30 00:06:14 +01:00
David Bauer
825577f6df ramips-mt7621: fix sysupgrade extension for ER-X 2019-10-30 00:06:14 +01:00
Martin Weinelt
ba3415059c ar71xx-generic: drop ALFA N2, N5, Tube2H and Hornet-UB
Their kernel partition is too small, the OpenWrt build system
is unable to create an image.
2019-10-30 00:06:14 +01:00
David Bauer
82cdd5f808 targets: adapt ath10k selection to OpenWrt 19.07
This changes the ath10k firmware and driver selection, as
ath10k-ct is now the default in upstream OpenWrt.

However, for 802.11s operation we need the QCA firmware and driver.
2019-10-30 00:06:14 +01:00
David Bauer
dc8d5d3ca9 gluon-setup-mode: get status-led from device-tree
With this commit, the status-led is set to be the "led-running"
device-tree alias for targets which do not implement the get_status_led
method in /etc/diag.sh.
2019-10-30 00:06:14 +01:00
David Bauer
09780191cb targets: remove wpad-basic by default
This is necessary, as wpad-basic conflicts with hostapd-mini.
2019-10-30 00:06:14 +01:00
Matthias Schiffer
b262b72563 gluon-mesh-batman-adv: adjust to removal of batman-adv UCI config 2019-10-30 00:06:14 +01:00
David Bauer
75fa7e73db gluon-setup-mode: fix dropbear hostkey generation
Upstream commit 5eb7864a changed the method name for host-key
generation.
2019-10-30 00:06:14 +01:00
David Bauer
966f398782 modules: switch to OpenWrt 19.07 2019-10-30 00:06:14 +01:00
David Bauer
3522197ff9 ar71xx-generic: add missing ath10k packages (#1844)
This adds previously absent ath10k packages definitions. This way,
devices correctly select CandelaTech firmware correctly, when
GLUON_WLAN_MESH is set to IBSS.

This is also necessary for all devices, when OpenWrt is switched to
19.07.
2019-10-22 02:15:35 +02:00
Ruben Barkow
e990342f85 docs: replace alfred with respondd (#1842) 2019-10-16 23:59:17 +02:00
Marssl78
b823b80356 ar71xx-generic: add support for TP-Link Archer C60 v2 (#1840) 2019-10-06 22:11:02 +02:00
Andreas Ziegler
94ca071e12 ar71xx-generic: fix device alias for Ubiquiti UniFi AC LR
fixes #1834
fixes #1332
2019-10-03 21:22:12 +02:00
David Bauer
ea24298f2d ar71xx-generic: add ath10k packages to OCEDO Koala (#1838)
The OCEDO Koala was missing the correct package definition. Because of
this, firmware is potentially built with the wrong ath10k firmware /
driver.
2019-10-03 01:44:20 +02:00
lemoer
21397ce678 gluon-status-page: add domain and site (#1820) 2019-09-30 02:00:17 +02:00
Christof Schulze
6d64057536 gluon-mesh-babel: neighbours-babel: adjust to libbabelhelper interface
specify command 'dump' for now until babeld supports filtering
2019-09-29 22:44:39 +02:00
Christof Schulze
33fb58bbf9 gluon-mesh-babel: getnumber() allocate sufficient memory including \0 byte
increase size of path by 1 to be able to fit the full path including trailing \0 byte into array
2019-09-29 22:44:39 +02:00
lemoer
f90b673f14 contrib: fix inheritance of jenkins-community-slave dockerfile (#1831) 2019-09-28 00:56:53 +02:00
Martin Weinelt
a394054d81
modules: update Gluon packages
de7b228 batman-adv-legacy: remove the package
85c8044 l3roamd: update to fix build
295f055 l3roamd: bump version: instant claiming, FIX removing routes
2019-09-27 10:05:13 +02:00
lemoer
174dd3146f contrib: Set up continuous integration through Jenkins 2019-09-26 16:12:09 +02:00
bobcanthelpyou
8553254867 docs: fix typos 2019-09-26 13:04:19 +02:00
Matthias Schiffer
5b97d36c7e gluon-mesh-batman-adv: remove gluon-mesh-batman-adv-14 2019-09-25 21:57:52 +02:00
Matthias Schiffer
7837bc1059 Gluon v2019.1
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE7tAWAry9GWw4vJofvUqgUo9j8X4FAl2HqPMACgkQvUqgUo9j
 8X4XGQgAss8qY9mDtSBCEvIOXZVlopDYH/JxY/24EUOpJQSNgeJuLdlf/p5uS5c7
 5fIsAjRbnX+QVzWVX74KmOlZ9Dl8FSiUhu9IOveRTqGUIzLEKzTSyLABdtloFBni
 rFCcLN5805XGksqgUnfC3+sz2ogKrBTtKe4jR8HyzI1xQn1W7s1TWKdL+muBWqrJ
 Hi+5r+FiT9VWpKQDHM2EtSNBZuych5lN0YmuSBgdsLU5u+rBJtTg79FAVqY0XRaq
 9FbSPii/c68OI7DkK5lkbVRcCHn5E8QqsYJnUgV4rvwxXhLS0A0QHqiqwRx3wvK6
 2uXMQl+E5e+F8T3oSJcUt2gKin+xtg==
 =pRPr
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEZmTnvaa2aYgexS51Fu8/ZMsgHZwFAl2KmiMACgkQFu8/ZMsg
 HZzdahAAoQr3dREwQatJtJnJVfm9q24Yz9ukbWM/8AAEJHJb2YY43d5nrNo+Z/OQ
 rbp1NA6pYWryReq93lUR44IGzPX6MtYf+nZ8mAJlUtHOigo5JsAlSSljJckJevU1
 okLh5lkiS6tBgTNK4ziXFfCD6d2AOwL7LEX+ULGKPWShmpm9JI42oOH+yE+eDids
 oFI0uvCw0rBHoX8Ye0GDEljwVhWewENTV/mPf+kGUVh64AcSVXECJQv0fA6uWxC6
 3I+Q6coriOO5wLXjW4NeCKmJNcrhZ7pGQiEWusw294pVz7/f3VawGDr2CsW6kkzR
 ggjhrsGzs3li3IeCttNrfwIx86UsICw1g12bw7AUNrn589AA4OM31uZQQk2s918h
 c1fie6z5y0V0RKilG6+z56WCdKZnKSecdaaYx0vKWL0DMgACvxOTIOoaWbODKjdx
 cY4nLcD2aiGQ/d+pw6LKDQuTiE1ORaa+MkDyN0/ZnMI2FLWJq646kO1V33JgBF0r
 tQ6n7dUwDB9rkZ/UUqqwmneeXs2vxNpnHQg/YiiFEDrdNsBC2irmWuP2Ui6JD9Rj
 Kik6NTve1f7Jp0w8ssgjyTC7mhL6fES4VFkaQP+vrmTI8qSl0QudZXT3bIOfc+sa
 hve8DPfu2yof5fdDrY47PqlNXkKE2IvulIzm+h7OSLXL+hrsDQE=
 =vgC5
 -----END PGP SIGNATURE-----

Merge tag 'v2019.1'

Merge tag to fix 'git describe'
2019-09-25 00:34:29 +02:00
Tata
6742584e12 gluon-config-mode-geo-location: allow to set location independently from sharing it (#1537)
also properly delete location data when a user disables
the location option after re-entering config-mode.
2019-09-24 09:56:40 +02:00
Christof Schulze
6aee8e95e8 gluon-mmfd: add package (#1802) 2019-09-23 21:34:53 +02:00
Martin Weinelt
dcfbbea090
docs: Gluon v2019.1+ 2019-09-23 13:57:33 +02:00
Andreas Ziegler
07fe28c855
ar71xx-generic: add zram-swap to boards with 8M flash but only 32M memory (#1819) 2019-09-23 09:54:54 +02:00
Martin Weinelt
bf5b026a87 docs: Add v2019.1 release notes 2019-09-22 19:11:28 +02:00
Martin Weinelt
ca3631723f
docs: Add v2019.1 release notes 2019-09-22 18:58:33 +02:00
Linus Lüssing
ff050a2916 docs: gluon-mesh-batman-adv: note regarding IGMP/MLD snooping switches
This adds a warning that entprise switches with an IGMP/MLD snooping
feature are not supported yet with IGMP/MLD filtering enabled.

For this to work, firstly the Linux bridge on the Gluon node needs to
support Multicast Router Discovery (RFC4286). But this feature was only
added to the Linux kernel recently, in 5.1.

Secondly, a Gluon node would need to periodically send "Multicast Router
Advertisment" (RFC4286) messages, to "announce" the multicast router
port setting on bridge port bat0.

Thirdly, the IGMP/MLD snooping switches would need to implement
RFC4286.
2019-09-21 23:45:44 +02:00
Linus Lüssing
302a795189 Revert "gluon-mesh-batman-adv: reenable batman-adv multicast optimizations"
This reverts commit 9b1eb40fe7.

With the batman-adv v2019.2 upgrade reverted (c1a7733956), the batman-adv
multicast-to-multi-unicast feature is not available yet. Without that it is
going to be very unlikely of the batman-adv multicast optimizations to
take effect. E.g. some outdated nodes would disable it.

To avoid confusion and diversion with a few communities having it enabled
and most implicitly deactivated, just deactivate it for all for now
until batman-adv is updated to v2019.2 or greater again.
2019-09-21 23:28:12 +02:00
Martin Weinelt
be965e7e4a ar71xx-generic: deprecate ALFA AP121, Hornet-UB, Tube2H, N2/N5
The kernel partition on these devices is too small for the
OpenWrt 19.07 kernel. It is also located after the rootfs, so
we cannot grow it further.

Therefore mark these devices as deprecated now.
2019-09-20 17:02:41 +02:00
Martin Weinelt
cdb334aae9 docs: mark ar71xx-tiny and ramips-rt305x as deprecated 2019-09-20 17:02:41 +02:00
Martin Weinelt
798236b3cf
docs: gluon-hoodselector: add openstreetmap copyright
Fixes #1821
2019-09-17 13:21:42 +02:00
bobcanthelpyou
2792309cd4 docs: remove Netgear WNDR3700 v5 (#1817) 2019-09-15 14:28:23 +02:00
bobcanthelpyou
5ed145c6a6 docs: mention ff05::2:1001 on the node monitoring page (#1818) 2019-09-15 14:25:18 +02:00
Tata
69fd7b5d81 docs: gluon-hoodselector: fix arrow with 0->0.05 to let it visible on svg's (#1816) 2019-09-14 15:34:26 +02:00
Matthias Schiffer
78054cddbf
scripts: target_config_lib: fix inclusion of device-specific packages from site.mk
Fixes: 071cf7b20f ("Switch to Lua for target definitions")
2019-09-14 13:46:56 +02:00
Andreas Ziegler
b113e0f517
ramips-rt305x: remove opkg and USB packages from 4M flash boards (#1807)
reduce size by removing dispensable packages,
to fix builds of this target in most cases.
2019-09-14 13:24:37 +02:00
Christof Schulze
a3fd203e13 gluon-mesh-babel: add dependency: gluon-l3roamd
gluon-mesh-babel conigures babeld and thus the mesh. This mesh is only usable
with routes to the clients which are discovered by l3roamd.
2019-09-14 00:32:55 +02:00
Christof Schulze
d5a4f4fd8c gluon-mesh-babel: distribute routes to 2000::/3 2019-09-14 00:32:55 +02:00
Christof Schulze
59b7625e54 gluon-l3roamd: utilize node_client_prefix6 from site, add checks
* add check_site.lua to validate required field from site
* make use of node_client_prefix6 if defined in site
2019-09-14 00:32:55 +02:00
Andreas Ziegler
a96f996e1b
docs: add v2018.2.3 release notes 2019-09-13 00:10:18 +02:00
T-X
bce76bcaf0 docs: Add documentation for gluon-mesh-batman-adv (#1810)
This adds documentation for the gluon-mesh-batman-adv package and
elaborates on its build and configuration options, as well as
the implemented multicast architecture.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
2019-09-10 23:55:06 +02:00
Matthias Schiffer
b2f5f71c43
gluon-web-wifi-config: fix incorrect UCI call
Fixes #1809

Fixes: bf55249159 ("gluon-core: add outdoor support for 5 ghz radios")
2019-09-06 20:37:37 +02:00
Matthias Schiffer
fdf552e55e
uboot-fritz4040: add fixes for bootloader image generation
This seems to unbreak bootloader image generation with certain shells /
build setups.

Fixes #1766
2019-09-04 21:03:08 +02:00
Matthias Schiffer
45183296c3
modules: update Gluon packages
e130b6f54d0f simple-tc: increment PKG_VERSION
89260206971f libbabelhelper: bump version to allow specifying the command for readbabeldata()
0447a6960caf bump mmfd: Bugfix Crash  and firends
2019-09-04 20:57:37 +02:00
Christof Schulze
bd543db86b gluon-core: enhance mac_to_ip() beyond RFC 4291 (#1798)
mac_to_ip() calculates an ipv6 address from a mac address according to
RFC 4291. For wireguard we have to use specially crafted addresses that
must be unique. This allows calculating such unique mac-based addresses
by allowing to optionally specifying the bytes to be inserted into the
address.
2019-08-23 20:42:23 +02:00
Matthias Schiffer
087f14be80
docs: whitespace fixes 2019-08-22 23:07:23 +02:00
Matthias Schiffer
79933d7e83
docs: document new mesh.batman_adv.routing_algo settings for coexistence 2019-08-22 23:05:32 +02:00