nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,609 Commits 26 Branches 63 Tags 18 MiB
bbdc334b43
Commit Graph

622 Commits

Author SHA1 Message Date
Delta / Stefan
bbdc334b43 gluon-status-page: add TB to list of units for transfer volumes 
Fixes #614
 2016-01-07 18:09:30 +01:00
Matthias Schiffer
f23e024787 Convert site.conf to JSON during build 
This will allow us to use its content from other languages than Lua as
well.
 2016-01-02 23:49:25 +01:00
Matthias Schiffer
8ffdcaaa1b gluon-mesh-batman-adv-core: announce/neighbours.d: use batman-adv-visdata 2015-12-18 17:46:24 +01:00
Matthias Schiffer
939087cec9 gluon-status-page-api: neighbours-batadv: use batman-adv-visdata, increase interval 2015-12-18 17:46:24 +01:00
Matthias Schiffer
90a64ca87f gluon-status-page-api: use sse-multiplex 2015-12-18 17:46:24 +01:00
Matthias Schiffer
fa504dae8d gluon-neighbour-info: simplify and fix timeout calculation 
The timeout was calculated incorrectly (in each iteration the span between
the start time and the current time was substracted from the timeout
again), and would often become negative, causing warnings in the kernel
log.
 2015-12-18 17:46:24 +01:00
Matthias Schiffer
a3155c427a gluon-neighbour-info: fix a few compiler warnings 2015-12-18 17:46:24 +01:00
Matthias Schiffer
d3bc707caa gluon-neighbour-info: flush after writing the HTTP header 
sse-multiplex likes to get the header as fast as possible.
 2015-12-18 17:46:24 +01:00
Matthias Schiffer
c3150d821f gluon-announce{,d}: create a new UCI cursor for each run 2015-12-18 17:46:24 +01:00
Matthias Schiffer
077dbe3c08 gluon-status-page-api: decrease dyn/statistics event frequency 
The statistics data is now cached for 5s, no need to send an event every
second. The new interval is 3s, which is coprime with the cache timeout.
 2015-12-18 17:45:45 +01:00
Matthias Schiffer
48d24c2674 gluon-announce: enable caching 2015-12-18 17:43:16 +01:00
Matthias Schiffer
eba7ecbbc0 gluon-announced: add support for caching announced data 2015-12-18 17:43:12 +01:00
Matthias Schiffer
5927fd66db gluon-status-page: filter out duplicate events in statistics event stream 
Allows simple handling of cached events.
 2015-12-18 17:37:48 +01:00
Matthias Schiffer
5ecb8a7366 gluon-mesh-vpn-fastd: gluon-annouced: fix fastd status always being reported as enabled 2015-12-08 22:47:32 +01:00
Nils Schneider
0bb530d1c6 gluon-status-page: fix display of rx and tx traffic 
On the status page statistics section counters for transmitted and received traffic were mixed up. Transmitted traffic was shown as received while received traffic was shown as being transmitted.

Fixes #586
 2015-12-07 13:44:17 +01:00
Matthias Schiffer
9c7582afe0 gluon-luci-private-wifi: fix typo in code file and regenerate translation files (correctly this time) 2015-11-27 14:33:56 +01:00
Matthias Schiffer
7f0fe061dc gluon-luci-private-wifi: fix translation files 2015-11-27 09:49:12 +01:00
Matthias Schiffer
d428576ec5 Merge pull request #552 from freifunk-gluon/disable-mesh 
gluon-mesh-batman-adv-core: keep disabled state even when the mesh interface section name is changed
 2015-11-23 00:42:39 +01:00
Matthias Schiffer
81b2142e65 Merge branch 'patch-1' of https://github.com/ohrensessel/gluon 2015-11-22 23:28:39 +01:00
Matthias Schiffer
0335ce10e2 gluon-mesh-batman-adv-core: keep disabled state even when the mesh interface section name is changed 
Is makes sense to always look for both ibss_radio* and mesh_radio* sections
to determine if the meshing should be enabled when regenerating these
sections. Doing this, the disabled state will survive updates changing the
section name (either updating from pre-2015.2 while keeping IBSS, or
changing from IBSS to 11s or vice-versa).

If both ibss_radio* and mesh_radio* sections exist, the disabled state will
be kept correctly for each section, the behaviour is changed only when
creating a section that didn't exist before.

Fixes #549
 2015-11-18 03:01:18 +01:00
Matthias Schiffer
e528977100 gluon-site: set PKG_FILE_DEPENDS to site.conf and i18n/ only 
PKG_FILE_DEPENDS caused the whole site repo to be hashed to determine if
gluon-site needed rebuilding. While this is normally no problem,
alternative build setups sometimes put the Gluon repo inside the site repo,
causing long build times and parallel build failures.
 2015-11-18 02:39:05 +01:00
Leo Krueger
bc15b6c810 gluon-ebtables-filter-multicast: drop icmpv6 type 128 & 139, drop icmp 
in a layer 2 mesh network, multicast pings cause a lot of traffic in the
network, significantly increasing the 'backgroudn noise' (= Grundrauschen)
and stressing nodes in the network.

this commit blacklists all icmpv4 multicast traffic as well as multicast
icmpv6 echo-requests and node iformation queries. as no application
depending on these types of multicast traffic is known, blacklisting is safe.
 2015-11-12 21:16:37 +01:00
Matthias Schiffer
412e1ef147 gluon-core: fix removal of "OpenWrt" default WLAN interface 
Fixes #534
 2015-10-28 17:06:29 +01:00
Matthias Schiffer
3ddcf50b80 Drop htmode field from config, always use HT20 
Fixes #487
 2015-10-27 01:57:10 +01:00
Matthias Schiffer
3647cf1d18 Remove leftover file from gluon-radio-config 2015-10-27 01:57:10 +01:00
Matthias Schiffer
9b46a05de7 Merge pull request #450 from freifunk-gluon/status-page 
gluon-status-page: new status page
 2015-10-26 22:55:00 +01:00
Matthias Schiffer
557a073dc7 gluon-mesh-batman-adv-core/gluon-luci-portconfig: fix configuration of br-client ifname with multiple interfaces in lan_ifname 
There are a few devices on which lan_ifname contains multiple interface
names separated by spaces.
 2015-10-26 22:29:44 +01:00
Nils Schneider
84b6374970 gluon-client-bridge: basic br-client config and wireless AP 
This package provides br-client and sets up a wireless AP interface for
clients.
 2015-10-26 21:14:32 +01:00
Matthias Schiffer
22130e84e8 Merge gluon-radio-config into gluon-core 
gluon-radio-config contained only a single file. The code has been adjusted
to allow creating a Gluon configuration without WLAN support by removing
the wifi24 and wifi5 sections from site.conf.
 2015-10-26 20:59:56 +01:00
Matthias Schiffer
53211b5b46 Replace gluon-cron by micrond 2015-10-15 23:52:30 +02:00
Matthias Schiffer
d0a78ea8ba Merge branch 'opkg' 2015-10-15 22:28:41 +02:00
Matthias Schiffer
45d1d04ae3 Merge branch 'simple-tc' 2015-10-15 22:28:32 +02:00
Matthias Schiffer
2fefdeee63 gluon-mesh-batman-adv-core: neighbours.d/wifi: output empty object instead of empty list when there are no neighbours on an interface 2015-10-15 02:42:28 +02:00
Matthias Schiffer
26682b24b3 Replace gluon-simple-tc by non-Gluon-specific simple-tc 
The Gluon-specific functions of the gluon-simple-tc package are moved to
gluon-mesh-vpn-fastd.
 2015-10-15 02:38:47 +02:00
Jan-Philipp Litza
daa15290ab gluon-announce: Remove now unused collect.lua 
The file promotes the probably unnecessary re-execution of the announce
scripts. Instead, gluon-announced should be queried using

    gluon-neighbour-info -d ::1 -p 1001 -t0 -r nodeinfo

if both gluon-announced and gluon-neighbour-info are present. But to not
depend on any of those, no script for this one-liner is provided.
 2015-10-15 01:49:20 +02:00
Jan-Philipp Litza
bae6519279 gluon-alfred/gluon-status-page: Query gluon-announced 
By not executing all scripts from gluon.announce themselves, both should
be considerably faster and lighter on RAM usage.
 2015-10-15 01:49:20 +02:00
Jan-Philipp Litza
d2ff7d5c22 gluon-neighbour-info: Add -l and -c parameter, make event type for -s configurable 2015-10-15 01:49:20 +02:00
Matthias Schiffer
3725f7bca3 Merge remote-tracking branch 'origin/announce.d' 2015-10-15 01:31:05 +02:00
Matthias Schiffer
d5c334af6d gluon-core: replace opkg site configuration to make it more flexible 
The new options allow specifying custom repositories and are evaluated
in an upgrade script, not during build.
 2015-10-14 02:57:29 +02:00
Matthias Schiffer
b46d4fd537 gluon-mesh-batman-adv-core: make gateway selection class configurable 
Fixes #401
 2015-10-12 21:49:02 +02:00
Nils Schneider
9dffb1284f gluon-announce(d): preload functions, collectgarbage 
By calling collectgarbage() at various places I was able to reduce heap
usage by ~270kb.
 2015-10-12 20:54:03 +02:00
Nils Schneider
435ded0c60 gluon-announce: build a tree of functions first 
collect_dir() will now pre-load all files and return a function that will
collect all information.
 2015-10-12 20:54:03 +02:00
Matthias Schiffer
a22c808634 Merge pull request #466 from kb-light/11s-mesh-dev 
gluon-mesh-batman-adv-core: prepare for 802.11s mesh
 2015-10-11 23:01:08 +02:00
Matthias Schiffer
12f9df7e86 gluon-config-mode-core: don't throw error when no config mode modules are installed 
The expert mode can still be useful without any cohfig mode modules.
 2015-10-11 21:19:28 +02:00
Matthias Schiffer
05f146f817 Validate section names from site.conf in various packages 2015-10-11 19:34:14 +02:00
Ruben Barkow
06a2b2b1d1 gluon-luci-private-wifi: typo seperaten 2015-10-09 11:59:12 +02:00
Matthias Schiffer
98542b015d i18n: s/noeud/nœud/ 2015-10-08 22:16:25 +02:00
kb-light
955dc886a8 gluon-mesh-batman-adv-core: prepare for 802.11s mesh 
keep macfilter and maclist config after fw-update
 2015-09-22 10:48:09 +02:00
srauscher
16888d214d Add french translation 2015-09-17 07:28:09 +02:00
Alex
b465504ae8 add: info for 802.11s interface 
additional information for commit 2a93c58042
 2015-09-13 14:32:53 +02:00