gluon/package/gluon-core
Lars Wessels 5345ab52a9 ramips: add support for WAVLINK WL-WN577A2 (aka Maginon WLR-755)
This commit adds support for the Wavlink WL-WN577A2 (black case).
In Germany this dual-band wall-plug wireless router is sold under
the brand name Maginon WL-755 (white case).

Suppport for current OpenWRT-19.07-SNAPSHOT is included as patch.

CPU: MediaTek MT7628AN (580MHz)
Flash: 8MB
RAM: 64MB
Bootloader: U-Boot
Ethernet: 2x 10/100 Mbps (Ralink RT3050)
2.4 GHz: 802.11b/g/n SoC
5 GHz: 802.11a/n/ac (MT7610E)
Antennas: internal
4 green LEDs: Power and 3 programmable (LAN, WAN, WPS)
Buttons: Reset, WPS
Small sliding power switch

Flashing instructions (U-boot):

- Configure a TFTP server on your PC/Laptop and set its
  IP to 192.168.10.100
- Rename the OpenWrt image as firmware.bin and place it in
  the root folder of the TFTP server
- Power off the device and connect an Ethernet cable from
  its LAN or WAN port to your PC/Laptop
- Press the WPS button (and keep it pressed)
- Power on the device (using the small sliding power switch)
- After a few seconds, when the WAN/LAN LED stops blinking
  very fast, release the WPS button
- Flashing takes about a minute
- WPS LED will indicate OpenWrt device status

Signed-off-by: Lars Wessels <software@bytebox.org>
2020-07-04 21:40:52 +02:00
..
files gluon-reload: add missing service restarts on domain switching 2020-05-28 23:30:25 +02:00
luasrc ramips: add support for WAVLINK WL-WN577A2 (aka Maginon WLR-755) 2020-07-04 21:40:52 +02:00
src gluon-core: reimplement gluon.site module in C 2018-01-18 16:29:00 +01:00
check_site.lua gluon-core: add support for configuring the beacon interval 2020-05-30 00:47:33 +02:00
Config.in gluon-core: build in xt_CT with GLUON_SPECIALIZE_KERNEL 2020-05-28 19:40:29 +02:00
Makefile gluon-core: remove nixio dependency 2018-07-17 20:08:16 +02:00