As a partial fix to #496, do not touch the MAC address of the WAN
interface when using VXLANs (as only the MAC address of the VXLAN
interface matters to batman-adv).
On PoE-powered devices, we usually want to use WAN for the setup mode.
As all outdoor devices are PoE-powered, we can reuse this function. This
switches the setup mode interface for new installations / after config
reset on a few devices that were missing in this list before.
The 'preserve' flag can be used to mark a peer so it is not removed or
modified on upgrades. In addition, groups containing preserved peers are
not removed.
Fixes: #557
The netdev() lookup is confusing to use: whenever a interface does not
exist during boot (for example VLAN) or when the address is overridden
from board.json (which is not obvious at all), it will yield either no
address, or a different address than expected.
To avoid this confusion, using board.json-based interface() is
preferable. This converts all uses of netdev() to the corresponding
lan/wan lookups, except for the final fallback for eth0.
- Replace misnamed, closure-returning sysfs() to a reusable read() function
- Rename eth() to netdev(), pass full interface name
- Rename board() to interface()
- Split reuable get_netdev_addr() out of netdev()
gsub() returns the number of matches as its second return value. This
was unintendedly passed through by the util functions trim() and
node_id(). It can be presumed that this had no effect in practice, but
it can lead to surprising output when passing values to print() for
debugging.
Allows reconfigurtion of remote syslog from within site.conf.
Conflicts with the gluon-web-logging package as user made changes
will be overwritten, because this package will reconfigure the syslog
destination on every upgrade.
Resolves#1845
Use the value of the `name` site.conf field as label (it was
accidentally unused before).
Our site.conf currently doesn't define a specific order for the branch
entries. To avoid changing branch orders, sort entries by this label.
Fixes: #1961
Register to 'reset' event on form element and make call to 'update' function
delayed in 'data-update' handler to allow the form values to update beforehand.
When using a form's 'reset' button, form field visibility was not updated.
This could lead to situations where a checkbox had to be toggled again
twice to display the detail text inputs. (Example taken from private
wifi package)
This adds a helper method, which determines if the current platform
supports WPA3 or not.
WPA3 is supported if
- the device is not in the featureset category "tiny"
- the WiFi driver supports 802.11w management frame protection
The gluon-wireless-encryption package selects a WPA3 supporting
hostapd package as a dependency and stores the information, which
encryption method is supported to the device.
This package adds support for SAE on 802.11s mesh connections.
Enabling this package will require all 802.11s mesh connections
to be encrypted using the SAE key agreement scheme. The security
of SAE relies upon the authentication through a shared secret.
In the context of public mesh networks a shared secret is an
obvious oxymoron. Still this functionality provides an improvement
over unencrypted mesh connections in that it protects against a
passive attacker who did not observe the key agreement. In addition
Management Frame Protection (802.11w) gets automatically enabled on
mesh interfaces to prevent protocol-level deauthentication attacks.
If `wifi.mesh.sae` is enabled a shared secret will automatically be
derived from the `prefix6` variable. This is as secure as it gets
for a public mesh network.
For *private* mesh networks `wifi.mesh.sae_passphrase` should be
set to your shared secret.
Fixes#1636
Remove a lot of redundant code by switching to a match table listing
the targets and boards for each candidate for the primary MAC interface.
In addition, we add some flexiblity by allow to switch out the sysfs file
data source for the MAC address.
This reverts commits
- caf2dd037b.
- 07ebac6a49
- 55eff45f96
I accidentally pushed these commits as I had them lying around on a
dirty checkout I did testing on.
In addition this PR contains:
- split of gluon-respondd provider into multiple source files
- minor additional cleanups in gluon-mesh-babel respondd provider
(untested, as the babel respondd provider already doesn't compile prior
to these changes...)
many AVM devices do not have RESET/WPS buttons. So use the otherwise unused DECT/PHONE button to boot the device into setup mode.
This patch allows to enter the setup-mode by pressing the phone button
(often labeled as DECT) in addition to WPS and reset button.
This patch is necessary to allow supporting boards without a WPS and reset
button (e.g. AVM FRITZ!Box 7312).
With this commit, the status-led is set to be the "led-running"
device-tree alias for targets which do not implement the get_status_led
method in /etc/diag.sh.
This reverts commit 9b1eb40fe7.
With the batman-adv v2019.2 upgrade reverted (c1a7733956), the batman-adv
multicast-to-multi-unicast feature is not available yet. Without that it is
going to be very unlikely of the batman-adv multicast optimizations to
take effect. E.g. some outdated nodes would disable it.
To avoid confusion and diversion with a few communities having it enabled
and most implicitly deactivated, just deactivate it for all for now
until batman-adv is updated to v2019.2 or greater again.
mac_to_ip() calculates an ipv6 address from a mac address according to
RFC 4291. For wireguard we have to use specially crafted addresses that
must be unique. This allows calculating such unique mac-based addresses
by allowing to optionally specifying the bytes to be inserted into the
address.
The new routing_algo site.conf value BATMAN_IV_LEGACY is introduced. With
these changes, the routing_algo setting becomes mandatory.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
We cannot add the same file (here: /lib/gluon/mesh-batman-adv/compat) to
two, installed packages. Therefore, instead of determining the compat
version number from this file, infer it from the batman-adv release
version number instead.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
This is a fix for the broken ingress traffic-shaping in gluon v2018.2.2
and possibly earlier.
For ingress traffic shaping the kernel option NET_ACT_POLICE is needed.
Before this patch there was no dependency to this. Neither in
gluon_core, gluon-mesh-vpn-core nor in the package.
This patch adds this dependency.
[Matthias Schiffer: move dependency from GLUON_CORE to gluon-mesh-vpn-core]
Fixes#1790
package/gluon-web-network/luasrc/lib/gluon/config-mode/model/admin/network.lua:122:16: (W431) shadowing upvalue f on line 19
Fixes: bab4af01e ("gluon-web-network: improve PoE GPIO name translation
handling")
The gluon-authorized-keys is usually installed to use SSH keys to
authenticate a user against the device. To make this useful, it is also
required to disable passwordless SSH access to the device.
This new dependency is only required when the user doesn't have
gluon-setup-mode enabled already.
Fixes: #1777
Reported-by: yanosz <github@yanosz.net>
Fixes: a753fa79e3 ("gluon-authorized-keys: add keys from site.conf")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
This MR includs only the VPN MODE of the hoodselector whitch simply set
hoods base on their geopositions.
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
check_site.lua: fix language syntax
muss -> must
rage -> range
at lease -> at least
coordiantes -> coordinates
realaise -> realised
gluon-hoodselector: fix language syntax in hoodselector
can not -> can't
routers -> router's
continure -> continue
to next -> to the next
TMP -> temporary
for current -> for the current
continure -> continue
with next -> with the next
thier -> there
provides -> provide
possition -> position
therfore -> therefore
gluon-hoodselector: fix language syntax in util.lua
realaise -> realised
gluon-hoodselector: fix language syntax and use autoupdate lock mechanism.
gluon-hoodselector: fix spelling/grammar
gluon-hoodselector: automatically set SECTION and CATEGORY for Gluon packages
gluon-hoodselector-add-VPN-MODE: add micrond & libjson-c dependency
gluon-hoodselector-add-VPN-MODE: check running hoodselector before loading lua
gluon-hoodselector-add-VPN-MODE: remove nixio dependency from hoodselector util
Revert "gluon-hoodselector-add-VPN-MODE: check running hoodselector before loading lua"
This reverts commit 535b0a1b2fb73e563bf6a44b568a796440bd307f.
add luaposix and luabitop to pakage dependency
sbin/hoodselector: remove nixio requiemend
sbin/hoodselector: load hoods only if necessary
gluon-hoodselector: use VPN abstraction layer. the hoodselectore does
not need to know about all individual VPN protocols.
gluon-hoodselector: Makefile add gluon-mesh-vpn-core as dependency
gluon-hoodselector: apply changes of mesh vpn lib
gluon-hoodselector: remove outdated comments
package/gluon-hoodselector: check_site.lua rm domain seed check thus its already checked by gluon-core
package/gluon-hoodselector: util.lua code cleanup and refactoring
package/gluon-hoodselector: hoodselector code cleanup and refactoring
gluon-hoodselector: util.lua, use taps instead of spaces. Use posix.unistd.access instead of io.open
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
gluon-hoodselector: hoodselector, use taps instead of spaces.
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
gluon-hoodselector: check_site.lua: replace hood with domain
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
gluon-hoodselector: drop VPN mode and rename hood to domain. Furthermore implement geolocator mode as neorayder way
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: rm duplicated print output
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector util: fix wrong function signature
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
small typo fixes
small typo fixes
Update util.lua
processes are really restarted now. new (old) problem: nodes will not forget their former ipv6-addresses. watchdog could here with that.
gluon-hoodselector util.lua: replace i iterator with _
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
Update util.lua
now polygons with holes are recognized correctly. also a mix of nested polygons and boxes should be possible as shapes[]
package/gluon-hoodselector: hoodselector use gluon-reload for daemon restarts/reloads
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: util.lua use math-polygon lib and rm restart_services function. Rectengles will be converted into polygons now
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: Makefile rewrite description update depends list
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: check_site.lua reduce complexity
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: use : for gluon_version Val
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: fix if equal syntax
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
luasrc/usr/lib/lua/hoodselector/util.lua: check_site.lua simplify checksite script and fix if logic
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: set space after comma, rm unnecessary error handling
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: use only brackes on require function no mixup
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: check_site.lua rm unuse variables and fix non std global function
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: util.lua rm unuse include
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: rm comment return nil in function get_geolocation()
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: Makefile refactor pkg description
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
We now keep the VPN enable state, bandwidth limit enable and actual limits
in the core config to avoid having to recover "user intent" from different
config files when the used VPN packages change.
Fixes#1736
Several fixes and enhancements related to multicast were added upstream
in batman-adv. So let's give the batman-adv multicast optimizations
another go.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
The is_outdoor function is placed inside the gluon.platform module, not
the platform_info module. Currently, the outdoor-mode wizard component
and the upgrade script fail due to nil-value calls.
adds a section to the wizard for outdoor capable devices
that informs the user of of the regulatory situation and
allows a quick toggle of the outdoor mode.
Add the `wifi5.outdoor_chanlist` site configuration that
allows specifying an outdoor channel range that can be
switched to for regulatory compliance.
Upon enabling the outdoor option the device will
- configure the `outdoor_chanlist` on all 5 GHz radios
- which may enable DFS/TPC, based on the regulatory domain
- disable ibss/mesh on the 5 GHz radio, as DFS *will*
break mesh connections
- allow for htmode reconfiguration on 5 GHz radios
The outdoor option can be toggled from
- Advanced Settings
- W-LAN
- Outdoor Installation
The `preserve_channel` flag overrules the outdoor channel
selection.
The batctl v2013.4 build was removed from the batman-adv-legacy package
as the current, upstream batctl releases work with batman-adv-legacy,
too.
As a replacement we need to add the upstream batctl dependency to
gluon-mesh-batman-adv-14 to have a batctl available again here.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
The commit a080049735 ("gluon-status-page-mesh-batman-adv: Retrieve TQ of
neighbors with non-best direct link") removed the check whether a neighbor
has the BATADV_ATTR_FLAG_BEST set. But consumers may still want to filter
out or mark neighbors which don't have this flag set. To assist with such a
feature, enhance the neighbor object with an extra boolean "best" attribute
which stores whether the BATADV_ATTR_FLAG_BEST was found or not.
Reported-by: Vincent Wiemann <webmaster@codefetch.de>
The commit ee63ed42fe ("gluon-mesh-batman-adv: List neighbors with
non-best direct link") removed the check whether a neighbor has the
BATADV_ATTR_FLAG_BEST set. But consumers may still want to filter out or
mark neighbors which don't have this flag set. To assist with such a
feature, enhance the neighbor object with an extra boolean "best" attribute
which stores whether the BATADV_ATTR_FLAG_BEST was found or not.
Reported-by: Vincent Wiemann <webmaster@codefetch.de>
Links between two direct neighbors are not always the best route between
these devices. The flag BATADV_ATTR_FLAG_BEST would not be set for these
originator entries and the respondd module would just ignore this entry.
If these neighbors are not accepted and returned to the status page then
some of the neighbor entries will show a name, (acceptable) signal strength
and mac address but no TQ value.
Fixes: 28668c8c52 ("gluon-status-page: API")
Links between two direct neighbors are not always the best route between
these devices. The flag BATADV_ATTR_FLAG_BEST would not be set for these
originator entries and the respondd module would just ignore this entry.
This causes missing links in meshviewer and similar tools. And when the
link quality is nearly equal and but fluctuates slightly, these links will
from time to time appear and disappear on the map.
Fixes: 2e0e24a992 ("announce neighbours using alfred/gluon-announce")
The device is broken until the next release. The LEDs are currently not
working (fixed in current OpenWRT master).
Also give a brief explanation about the BROKEN status being dependent on
the WiFi chip used and not the SoC family in general.
When two domains alias the same name (or one aliases another), display a
meaningful error message like:
Failed to alias domain 'foo' as 'bar', name already taken by
domain 'baz'.
The amount of local wifi clients is currently counted by two different
ways:
* asking the kernel wifi layer for the number of of clients on 2.4GHz and
5GHz band
* asking batman-adv for the number of non-timed out entries in the local
translation table with WiFi flag
The number of wifi24+wifi5 and the number of TT wifi client counts are
reported via respondd to various consumers. The ffrgb meshviewer is
displaying these values as:
* 2,4 GHz: wifi24
* 5 GHz: wifi5
* other: (TT local wifi+non-wifi clients) - (wifi24 + wifi5)
But the local translation table is holding entries much longer than the
wifi layer. It can therefore easily happen that a wifi client disappears in
the kernel wifi layer and batman-adv still has the entry stored in the
local TT.
The ffrgb meshviewer would then show this count in the category "other".
This often results in confusions because "other" is usually for ethernet
clients. And nodes with a frequently disappearing larger group of clients
(near bus stations or larger intersections) often show most clients under
the group "other" even when this devices doesn't have a LAN ethernet port.
It is better for presentation to calculate the number of total wifi clients
by summing up wifi24 + wifi5. And getting the number of total clients (non
wifi + wifi) by adding the result of the previous calculation to the sum of
non-wifi client in the local batman-adv translation table.
Fixes: 89a9d8138c ("gluon-mesh-batman-adv-core: Announce client count by frequency")
Reported-by: Pascal Wettin <p.wettin@gmx.de>
Gluon has multiple ways to obtain unique MAC-addresses. They are either
provided by the WiFi driver or derived from the primary MAC-address.
Quoting the same file:
> It's necessary that the first 45 bits of the MAC address don't
> vary on a single hardware interface, since some chips are using
> a hardware MAC filter. (e.g 'rt305x')
This currently fails in case the rt35xx based chips mac address differs
from the primary MAC. In this case, the MAC address for the client0 radio
(vif 1) comes from the WiFi driver. As there is only a single
MAC-address provided by '/sys/class/ieee80211/phyX/addresses' but the
MAC-address for mesh 0 (vif 2) is derived from the Node-ID, resulting in
different first 45 bits. The WiFi won't come up altogether in this case.
This commit verifies at least 4 MAC-Addresses are provided by the WiFi
driver. If this is not the case, all MAC-addresses are derived from the
primary MAC. This way, affected radios are working correctly.
This commit distributes dualband radios evenly on 2.4 GHz and 5GHz with
2.4 GHz being prioritised higher than 5 GHz. This means in case a device
has only a single radio and this radio supports operation in both bands,
it will be set to 2.4 GHz.
Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Signed-off-by: David Bauer <mail@david-bauer.net>
Allow odhcp6c to fork the script to handle router
advertisments in 30 seconds intervals. This is the value
that was previously used in Gluon v2018.1 / LEDE 17.01.
The default value is 3 seconds and while it is RFC compliant
it can put alot of pressure on even moderately sized devices.
Signed-off-by: Martin Weinelt <martin@darmstadt.freifunk.net>
log-file /dev/stderr is broken for babeld as it eats log messages for debug log.
This commit gets rid of the option. This allows -d N to be used as babeld command
line option.
This patch makes use of the new feature in l3roamd to gracefully
add, remove and list the mesh interfaces that are currently in use. This
helps when changing mesh interfaces often - a characteristic of the
wireguard protocol implementation as in the previous behavior all local
clients are dropped when adjusting mesh interfaces.
gluon-wan is a sudo-like exec wrapper that switches the process group to
gluon-mesh-vpn, making it use the WAN dnsmasq rather than resolving over
the mesh.
Note that this only affects DNS at the moment. Processes running under
gluon-wan will still use the regular mesh IPv6 routing table, and not the
WAN routing table. This is not a problem for IPv4, as there is only one
IPv4 routing table.
Fixes#1575
Rename to respondd.c / respondd.so, gluon.mk expects these names. This way
we can remove the install code. The installed filename is changed to
gluon-mesh-babel.so, bringing it in line with out common naming scheme.
The redirect and dnat target are needed for gluon-alt-esc-client to
forward frames to the selected, alternative gateways.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
This adds support for the TP-Link TL-WR902Ac v1 travel router.
The device is marked as broken due to 64MB which might be insufficient
in certain environments.
Before 7827f89, mandatory hostname field in config mode was
pre-filled with the default hostname.
This commit adds the config_mode.hostname.prefill option for
controlling the default value.
this activates the package by default when using the batman feature
while still allowing to explicitly remove it like this:
GLUON_SITE_PACKAGES := \
-gluon-ebtables-limit-arp
gluon-config-mode-geo-location-osm extends the
gluon-config-mode-geo-location with a location picker based on
OpenStreetMaps.
Based-on-patch-by: Jan-Tarek Butt <tarek@ring0.de>
The new code is shorter and uses more readable variable names. It does not
depend on specifically named input fields anymore (allowing to use multiple
maps on the same page), and only uses well-defined interfaces to trigger
revalidation of input fields.
The Map model class allows to add OSM maps to gluon-web forms.
Let gluon-respondd expose "MemAvailable" from /proc/meminfo to allow for
a more realistic memory-usage estimation.
Information on MemAvailable can be found here:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
commit/?id=34e431b0ae398fc54ea69ff85ec700722c9da773
As already done with other config mode texts, the altitude field now has
default texts that are used when they are not set in the site i18n files.
The altitude-help text has been removed from site i18n; instead, the
geo-location-help text now overrides the whole section description
including the part that mentions the altitude.
This reverts commit b3d7011130.
with this change, DNS in batman-adv based networks is broken.
although the revert breaks babel based networks, this is not as big of a problem.
This device is a dual 5GHz device. It is recommended to manually change the
radio of the first device to the lower 5GHz channels and the second radio
to the upper 5GHz channels.
The commit b3762fc61c ("gluon-client-bridge: move IPv4 local subnet route
to br-client (#1312)") moves the IPv4 prefix from the local-port interface
to br-client. A client requesting an IPv4 connection to the IPv4 anycast
address of the node (the device running gluon) will create following
packets:
1. ARP packet from client to get the MAC of the mac address of the anycast
IPv4 address
2. ARP reply from node to client with the anycast MAC address for the IPv4
anycast address
3. IPv4 packet from client which requires reply (for example ICMP echo
request)
4. ARP request for the client MAC address for its IPv4 address in prefix4
(done with the mac address of br-client and transmitted over br-client)
5. IPv4 packet from node (transmitted over br-client with br-client MAC
address) as reply for the client IPv4 packet (for example ICMP echo
reply)
The step 4 and 5 are problematic here because packets use the node specific
MAC addresses from br-client instead of the anycast MAC address. The client
will receive the ARP packet with the node specific MAC address and change
their own neighbor IP (translation) table. This will for example break the
access to the status page to the connected device or the anycast DNS
forwarder implementation when the client roams to a different node.
This reverts commit b3762fc61c and adds an
upgrade code to remove local_node_route on on existing installations.
The commit b3762fc61c ("gluon-client-bridge: move IPv4 local subnet route
to br-client (#1312)") moves the IPv4 prefix from the local-port interface
to br-client. A client requesting an IPv4 connection to the IPv4 anycast
address of the node (the device running gluon) will create following
packets:
1. ARP packet from client to get the MAC of the mac address of the anycast
IPv4 address
2. ARP reply from node to client with the anycast MAC address for the IPv4
anycast address
3. IPv4 packet from client which requires reply (for example ICMP echo
request)
4. ARP request for the client MAC address for its IPv4 address in prefix4
(done with the mac address of br-client and transmitted over br-client)
5. IPv4 packet from node (transmitted over br-client with br-client MAC
address) as reply for the client IPv4 packet (for example ICMP echo
reply)
The step 4 is extremely problematic here. ARP replies with the anycast IPv4
address must not be submitted or received via bat0 - expecially not when it
contains an node specific MAC address as source. When it is still done then
the wrong MAC address is stored in the batadv DAT cache and ARP packet is
maybe even forwarded to clients. This latter is especially true for ARP
requests which are broadcast and will be flooded to the complete mesh.
Clients will see these ARP packets and change their own neighbor IP
(translation) table. They will then try to submit the packets for IPv4
anycast addresses to the complete wrong device in the mesh. This will for
example break the access to the status page to the connected device or the
anycast DNS forwarder implementation. Especially the latter causes extreme
latency when clients try to connect to server using a domain name or even
breaks the connection setup process completely. Both are caused by the
unanswered DNS requests which at first glance look like packet loss.
An node must therefore take care of:
* not transmitting ARP packets related to the anycast IPv4 address over
bat0
* drop ARP packets related to the anycast IPv4 when they are received on
bat0 from a still broken node
* don't accept ARP packets related to the anycast IPv4 replies on local
node when it comes from bat0
Fixes: b3762fc61c ("gluon-client-bridge: move IPv4 local subnet route to br-client (#1312)")
optional = true does not make sense without a datatype. When no datatype is
set, the empty string will be a valid value, so data is never unset in the
write function. Restore the minlength(1) datatype so the contact setting is
deleted as intended when no value is provided.
* do not allow to obligatorily require contact information
* add remark that the data is provided voluntarily
* mention how to delete the data
* be very clear about the fact that the data being entered is public and
can be downloaded and processed by anyone.
This commit adds information about:
- how cpu time is spent since boot in jiffies (1/100*sek) (cpu)
- the value is summed for all cores, so in 10 seconds the
summed values will increase by 4000, if the cpu has
4 cores
- context switches since boot (ctxt)
- interrupt counters since boot (intr, softirq)
- forks since boot (processes)
{ "stat": {
"cpu": {
"user": 219403,
"nice": 1714,
"system": 75159,
"idle": 2727739,
"iowait": 2943,
"irq": 0,
"softirq": 571
},
"intr": 8426340,
"ctxt": 50992590,
"processes": 10549,
"softirq": 5161884
} }
In multidomain setups, VXLAN is enabled by default, but can be disabled in
domain configs using the mesh/vxlan option. In single domain setups, the
mesh/vxlan option is mandatory.
The UCI option for legacy mode is removed.
Fixes#1364
dnsmasq's caching is severly broken and does not handle all answer records
equally. In particular, its cached answers are missing DNSKEY and DS
records, breaking DNSSEC validation on clients.
Remove the cache for now. It may return if dnsmasq is fixed or we switch to
a different resolver.
net.ipv6.conf.br-client.forwarding is moved from gluon-client-bridge to
gluon-mesh-batman-adv, as the setting is not useful with non-bridged
protocols.
With the batman-adv multicast support compiled back in again we end up
with multicast addresses in the batman-adv translation table.
Currently we wrongly interpret multicast addresses returned by TT as a
unique host, too, which adds them with a source address filter to
ebtables as well. However, the source address of an ethernet frames is
never supposed to be a multicat one.
This leads to unnecessary entries in ebtables. Fixing this by ignoring
those MAC addreses returned by TT which have the multicast bit set.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
This setting allows to enforce manually setting a hostname.
In the initial configuration, the hostname field is now left empty; when
setting the hostname is not enforced, the default hostname is shown as the
field placeholder.
Fixes#1139
Our VXLAN setup was changed to accept VXLAN packets without checksum almost
2 months ago, so we can disable sending the checksums now as well. Slightly
improves performance.
The RFC standard multicast querier interval is 120s. Our querier uses in
interval of 20s for better support of roaming clients, but our robustness
setting of 3 leads to external queriers using the standard interval to be
timeout after only 60s, leading to frequent "querier appeared/disappeared"
messages. Increase robustness so that external queriers with any interval
<180s are supported.
We must ensure that each node becomes IGMP/MLD querier for its local
clients; having only a single querier for the whole mesh is generally
unreliable, leading to frequent "IGMP/MLD querier appeared/disappeared"
messages from batman-adv and unreliable snooping.
In smaller meshes it might be interesting only segment querier domains, but
allow membership reports to pass through the mesh, in order to support
snooping switches outside the mesh without special configuration. A
site.conf switch is provided to control this behaviour.
Fixes#1320
A downside of this behaviour is that the page does not work for IPv4-only
clients, as the redirect will always point at an IPv6 address.
Still, it seems like a good idea to enforce the redirect even from the IPv4
next-node address, as switching nodes while being connected to the status
page would lead to unexpected behaviour.
All Access-Control-Allow-Origin are removed to improve users' privacy. As
the status page API is thus not useful without the status page anymore,
merge them back into a single package.
The status-page-api respondd provider is removed as well.
Fixes#1194
This new status page is significantly smaller than the old one. It always
loads its resources from the same host as the page itself, not requiring
cross-origin requests anymore.
It also uses the common i18n infrastructure of gluon-web.
Fixes#914
- CGI script and index.html are moved from gluon-web to
gluon-config-mode-core, the script is renamed to 'config'
- gluon-web and gluon-web-model base views and i18n files are symlinked
into the new path
- gluon-web-theme is renamed to gluon-config-mode-theme and installs
directly into the new path
- all gluon-web-* models, controllers and views are moved into the new
path
By emitting Lua code to call translate() and pcdata(), we are more
flexible than when doing this internally in the parser. The performance
penalty should be negligible.
This patch moves the prefix4 subnet route from the local-node veth
device to br-client (while keeping the next node ipv4 address on the
local node device).
This is in preparation to allow routing over the br-client interface
later.
This package adds filters to limit the amount of ARP Requests
devices are allowed to send into the mesh. The limits are 6 packets
per minute per client device, by MAC address, and 1 per second per
node in total.
A burst of up to 50 ARP Requests is allowed until the rate-limiting
takes effect (see --limit-burst in the ebtables manpage).
Furthermore, ARP Requests with a target IP already present in the
batman-adv DAT Cache are excluded from the rate-limiting,
both regarding counting and filtering, as batman-adv will respond
locally with no burden for the mesh. Therefore, this limiter
should not affect popular target IPs, like gateways.
However it should mitigate the problem of curious people or
smart devices scanning the whole IP range. Which could create
a significant amount of overhead for all participants so far.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Both gluon.sysconfig and libgluonutil already remove the trailing newline
if it exists. It's nicer to avoid files without a trailing newline, e.g.
for printing the file contents in a terminal.
This is currently only implemented in the gluon-mesh-vpn-fastd
package.
Advertising the public key may be deemed problematic when
your threat-model involves protecting the nodes privacy
from tunnel traffic correlation by onlink observers.
It can be enabled by setting site.mesh_vpn.fastd.pubkey_privacy
to `false`.
If a value is unset or optional, an empty choice is added to the selection.
This empty choice will be marked as invalid if the value is not optional.
This is properly supported for the 'select' widget only for now, and not
for 'radio'.
This package drops all incoming router advertisements except for the
default router with the best metric according to B.A.T.M.A.N. advanced.
Note that advertisements originating from the node itself (for example
via gluon-radvd) are not affected.
Also disabling TX checksums and not only allowing incoming packets without
checksum will provide another small speedup. As doing so would break wired
meshing with VXLAN-enabled nodes that require non-zero checksums, we will
wait a few days before this step.
In addition to significant internal differences in check_site_lib.lua (in
particular unifying error handling to a single place for the upcoming
multi-domain support), this changes the way fields are addressed in site
check scripts: rather than providing a string like 'next_node.ip6', the
path is passed as an array {'next_node', 'ip6'}.
Other changes in site check scripts:
* need_array and need_table now pass the full path to the sub fields to the
subcheck instead of the key and value
* Any check referring to a field inside a table implies that all higher
levels must be tables if they exist: a check for {'next_node', 'ip6'} adds
an implicit (optional) check for {'next_node'}, which allows to remove many
explicit checks for such tables
This should not convert JSON to a Lua table and back, as this loses the
distinction between arrays and objects, but as our site.conf is defined in
Lua anyways (for now), this can be fixed in a later revision.
[Matthias Schiffer: rename to gluon-show-site, rebase]
By basing the Lua gluon.site module on gluonutil_load_site_config(), the
config load implementation needs to changed only in a single place for
multi-domain support.
This enables the ebtables internal locking mechanism which
will avoid race conditions between multiple, concurrent
ebtables calls.
This is a preparation for the upcoming gluon-arp-limiter
daemon, to avoid issues if upon restarting gluon-ebtables
the gluon-arp-limiter daemon tries to modify the tables.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Interacting with batman-adv's genl interface requires some code and
definitions which could be shared between different packages. libbatadv is
trying to do this without providing any guarantee for ABI or API stability.
It is only useful in very controlled environments like gluon.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
* gluon-core, gluon-client-bridge: introduce new firewall zone: local_client
* gluon-core: put clients in local_client zone, introduce drop-zone,
set dns-rules and zones
* gluon-respondd: allow respondd on mesh
* gluon-status-page-api: allow http input on mesh and client
Filtering by MAC address won't filter out multicast packages like router
solicitations, causing uradvd to send out router advertisements with
maximum frequency (every 3 seconds) in active meshes, even when no local
client is actually interested in the advertisements.
Fixes#1230
The new gluon.site lua library will eventually replace gluon.site_config
(which is hereby deprecated, but will continue to be supported for a
while).
The new gluon.site library will wrap all values to allow traversing
non-existing tables without errors.
site = require 'gluon.site'
c = site.a.b.c -- doesn't fail even if a or a.b don't exist
The wrapped values must be unwrapped using call syntax:
site_name = site.site_name()
Using the call syntax on a non-existing value will return nil. An
alternative default value may be passed instead:
mac = site.next_node.mac('16:41:95:40:f7:dc')
The generic upgrade script is moved to run after the more specific scripts.
In addition, the script will now remove the configuration sections of
uninstalled VPN packages, so both positive and negative changes of the
default enable state can be migrated correctly.
Based-on-patch-by: Cyrus Fox <cyrus@lambdacore.de>
Fixes: #1187
When a Gluon node is used to connect to an uplink router/DHCP server (for
example in deployments without VPN tunnels), the gw_mode must be set to
server; this should be preserved on upgrades.
Fixes#1196
